Type II

OmniaTap is the allrounder with integrated reverse osmosis incl. recirculation tank for Type II pure water and economical ultra pure water Type I.

OmniaTap

The Allrounder.
For H₂O pure types I + II.

OmniaTap is the ideal system when both pure water and ultrapure water are required, but in relatively small amounts. The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to tap water. A press on the dispenser button activates dispensing of ultrapure water type I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type II quality. The pure water tank has a second outlet for feeding downstream end users.

Features

• OptiFill dispenser is standard
• Pretreatment set for direct connection to tap water
• 10-litres pure water tank
• Tank volume display in percent
• Simple and economical filter replacement
• Leakage sensor is standard
• Ready-to-use, including filter cartridges

• Technical Data
• Flow chart

Specifications	OmniaTap	OmniaTap UV	OmniaTap UV/UF
Type I
Conductivit µS/cm	0.055	0.055	0.055
Resistance MΩ x cm	18.2	18.2	18.2
TOC-value* ppb	5 – 10	1 – 5	1 – 5
Dispensing performance l/min.	up to 2	up to 2	up to 1.6
Endotoxins* EU/ml	-	-	< 0,001
Particles**/ml	< 1	< 1	< 1
Bacteria** CFU/ml	< 0.1	< 0.1	< 0.1
Type II
Pure water performance l/h at 15 °C	6 or 12	6 or 12	6 or 12
Conductivity µS/cm	0.067 – 0.1	0.067 – 0.1	0.067 – 0.1
Resistance MΩ x cm	15 – 10	15 – 10	15 – 10
Pure water tank pressurized outlet	optional	optional	optional
Feedwater requirements
Tap water according to DIN 2000
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Manganese and iron content mg/l	< 0.05	< 0.05	< 0.05
Free chlorine content mg/l	< 0.1	< 0.1	< 0.1
Silt density index (SDI)	max. 3	max. 3	max. 3
Technical data
Operating pressure bar	2 – 6	2 – 6	2 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60	90-240/50-60
Connected load kW	0.1	0.1	0.1
Connector size mm	3/4"	3/4"	3/4"
Ambient temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Dimensions*** W x H x D mm	390 x 720 x 615	390 x 720 x 615	390 x 720 x 615
Weight kg	20	21	21
* in dependence on the feedwater quality ** with sterilizing filter 0.2 µm *** with OptiFill Dispenser

Article no.	System type*	Typical applications
18200051	OmniaTap 6	AAS, IC, ICP, buffers and media preparation
18200101	OmniaTap 12	AAS, IC, ICP, buffers and media preparation
18200052	OmniaTap 6 UV	Ultra-trace analysis, ICP-MS, HPLC, TOC
18200102	OmniaTap 12 UV	Ultra-trace analysis, ICP-MS, HPLC, TOC
18200053	OmniaTap 6 UV/UF	Life science and microbiology, cell culture media
18200103	OmniaTap 12 UV/UF	Life science and microbiology, cell culture media
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter included

Accessories
19200300	Wall mount Omnia
19200056	Disinfection kit Omnia
19200057	Disinfectant Omnia – 3 pcs./pack
19200021	Pre-treatment unit OmniaTap –10“

OmniaLab^ED+ is the larger allrounder for the complete laboratory. The perfect 100l tank system for both Type II applications and ultra pure water Type I.

OmniaLab^ED+

The big one.
For H₂O pure types I + II.

OmniaLabED⁺ is the system of choice when both pure water and ultrapure water are needed for the entire laboratory. The system complies with international water standards such as ASTM, ISO 3696 and CLSI. The economy of it is maximized by the inclusion of a continuously self-regenerating electrodeionizer, without having to give any demanding analytical applications a pass. Further to this, each OmniaLabED+-system holds 100 litres of pure water type II ready for withdrawal in a storage tank that is equipped with quality recirculation. OmniaLabED⁺ is exactly right as pure water supplier to autoclaves and laboratory washing machines.

Features

• OptiFill dispenser is standard
• Continuous residual salts removal by electro-deionization
• 100 litre storage tank with recirculation and pressure outlet
• Tank volume display in percent
• Tank volume can be modularly increased
• Simple, cost-effective filter replacement
• Leakage sensor is standard

• Technical Data
• Flow chart

Specifications	OmniaLabED+20	OmniaLabED+40	OmniaLabED+70
Type I
Conductivity μS/cm	0.055	0.055	0.055
Resistance M Ω x cm	18.2	18.2	18.2
TOC-value* ppb (with UV-unit)	1 – 5	1 – 5	1 – 5
Dispensing performance dispenser l/min.	up to 2	up to 2	up to 2
Particles**/ml	< 1	< 1	< 1
Bacteria** CFU/ml	< 0.1	< 0.1	< 0.1
Typ II
Pure water performance l/h at 15 °C	20	40	70
Conductivity µS/cm	0.067 – 1	0.067 – 1	0.067 – 1
Resistance* MΩ x cm	15 – 1	15 – 1	15 – 1
Silicate removal** %	99.9	99.9	99.9
Pure water tank pressurized outlet	optional	optional	optional
Feedwater requirements
Drinking water according to DIN 2000
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Manganese and iron content mg/l	< 0.05	< 0.05	< 0.05
Free chlorine content mg/l	< 0.1	< 0.1	< 0.1
Silt density index (SDI)	max. 3	max. 3	max. 3
Technical data
Operating pressure bar	2 – 6	2 – 6	2 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60	90-240/50-60
Connected load kW	0.25	0.25	0.25
Connector size mm	3/4"	3/4"	3/4"
Ambient temperature °C	+ 2 up to + 35	+2 up to + 35	+ 2 up to + 35
Dimensions Tower*** W x H x D mm	511 x 1520 x 575	511 x 1520 x 575	511 x 1520 x 575
Dimensions Base cabinet tank mm	511 x 800 x 575	511 x 800 x 575	511 x 800 x 575
Weight kg	43	43	45
* in dependence on the feedwater quality ** with sterilizing filter 0.2 µm *** with OptiFill Dispenser

Article no.	System type*	Typical applications
18700020	OmniaLabED+20	Feedwater for autoclaves and laboratory washers
18700040	OmniaLabED+40	Feedwater for autoclaves and laboratory washers
18700070	OmniaLabED+70	Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
16125000	Water softener MixMulti 32
19200021	Pre-treatment unit OmniaLab - 10“
19200050	UV Flow through disinfection – 254 nm
19200052	UV Unit for TOC reduction – 254 nm
16561201	External pressure booster pump SC 3000

OmniaLab^ED is the efficient solution when high quality pure water Type II is required for the complete lab supply.

OmniaLab^ED

The efficient one.
For H₂O pure type II.

OmniaLab^ED is the efficient solution when high quality pure water Type II is required for the complete lab supply. It is compliant with international water standards, such as ASTM, ISO 3696, CLRW (CLSI), and the combination with continual self-regenerating electro-deionization brings maximized economy. Further to this, the OmniaLab^ED system holds 100 liters of pure water in a storage tank with quality recirculation, ready to supply lab equipment. OmniaLab^ED is the efficient one for supplying autoclaves, lab machines and ultra-pure water systems.

Features

• OptiFill dispenser is standard
• Continuous residual salts removal by electro-deionization
• 100 litre storage tank with recirculation and pressure outlet
• Tank volume display in percent
• Tank volume can be modularly increased
• Simple, cost-effective filter replacement
• Leakage sensor is standard

• Technical Data
• Flow chart

Specifications	OmniaLabED20	OmniaLabED40	OmniaLabED70
Type II
Pure water performance l/h at 15 °C	20	40	70
Conductivity µS/cm	0.1 – 1	0.1 – 1	0.1 – 1
Resistance* MΩ x cm	10 – 1	10 – 1	10 – 1
TOC-value* ppb	< 30	< 30	< 30
Silicate removal* %	99.9	99.9	99.9
Dispensing performance dispenser l/min.	up to 2	up to 2	up to 2
Particles**/ml	< 1	< 1	< 1
Bacteria** CFU/ml	< 0.1	< 0.1	< 0.1
Pure water tank pressurized outlet	optional	optional	optional
Feedwater requirements
Softened water according to DIN 2000
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Manganese and iron content mg/l	< 0.05	< 0.05	< 0.05
Free chlorine content mg/l	< 0.1	< 0.1	< 0.1
Silt density index (SDI)	max. 3	max. 3	max. 3
Technical data
Operating pressure bar	2 – 6	2 – 6	2 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60	90-240/50-60
Connected load kW	0.25	0.25	0.25
Connector size mm	3/4"	3/4"	3/4"
Ambient temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Dimensions Tower*** W x H x D mm	511 x 1520 x 575	511 x 1520 x 575	511 x 1520 x 575
Dimensions Base cabinet tank mm	511 x 800 x 575	511 x 800 x 575	511 x 800 x 575
Weight kg	41	41	43
*  in dependence on the feedwater quality ** with sterilizing filter 0.2 µm *** with OptiFill Dispenser

Article no.	System type*	Typical applications
18700021	OmniaLabED20	Feedwater for autoclaves, laboratory washers and ultrapure water systems
18700041	OmniaLabED40	Feedwater for autoclaves, laboratory washers and ultrapure water systems
18700071	OmniaLabED70	Feedwater for autoclaves, laboratory washers and ultrapure water systems
* RO cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
16125000	Water softener MixMulti 32
19200020	Pre-treatment unit OmniaLab - 10“
19200050	UV Tank disinfecting unit 254 nm
19200051	UV Flow through disinfection – 254 nm
16561201	External pressure booster pump SC 3000

OmniaLab^UP is the system of choice when you need a constant supply of high-quality water in laboratories.

OmniaLab^UP

The constant one.
For H₂O pure type II.

OmniaLab^UP is the system of choice when you need a constant supply of high-quality water in laboratories. For this, OmniaLab^UP holds 100 litres of type II pure water in reserve in a storage tank with quality recirculation. It is an optimal supplier to autoclaves, lab rinsing machines and ultrapure water systems. The water produced conforms to international medical technology water standards such as ASTM, ISO 3696 and CLRW (CLSI).

Features

• OptiFill Dispenser is standard
• 100 l tank with quality recirculation and pressure outlet
• Tank volume display in percent
• Tank volume can be modularly increased
• Simple, cost-effective filter replacement
• Leakage sensor is standard

• Technical Data
• Flow chart

Specifications	OmniaLabUP20	OmniaLabUP40
Type II
Pure water performance l/h at 15 °C	20	40
Conductivity µS/cm	0.067 – 0,1	0.067 – 0,1
Resistance MΩ x cm	15 – 10	15 – 10
Dispensing performance dispenser l/min.	up to 2	up to 2
Pure water tank pressurized outlet	optional	optional
Particles*/ml	< 1	< 1
Bacteria* CFU/ml	< 0.1	< 0.1
Feedwater requirements
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35
Manganese and iron content mg/l	< 0.05	< 0.05
Free chlorine content mg/l	< 0.1	< 0.1
Silt density index (SDI)	max. 3	max. 3
Technical data
Operating pressure bar	2 – 6	2 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60
Connected load kW	0.1	0.1
Connector size	3/4"	3/4"
Ambient temperature	+ 2 up to 35 °C	+ 2 up to 35 °C
Dimensions Tower* W x H x D mm	511 x 1520 x 575	511 x 1520 x 575
Dimensions Base cabinet tank mm	511 x 800 x 575	511 x 800 x 575
Weight kg	40	40
* with sterilizing filter 0.2 µm ** with OptiFill Dispenser

Article no.	System type*	Typical applications
18600020	OmniaLabUP20	Feedwater for autoclaves and laboratory washers
18600040	OmniaLabUP40	Feedwater for autoclaves and laboratory washers
* RO cartridge, ultrapure water cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
19200020	Pre-treatment unit OmniaLab – 10“
19200050	UV tank disinfection unit 254 nm
19200051	UV Flow through disinfection 254 nm
16561201	External pressure booster pump SC 3000

OmniaLab^DS is the perfect solution when safety is first priority and the quality of the purification decides the quality of results.

OmniaLab^DS

The reliable one.
For H₂O pure types II + CLRW (CLSI) + DIN EN 285 + EN ISO 15883.

When safety is first priority and the quality of the purification decides the quality of results, then the OmniaLab^DS system is the perfect solution. Even for large pure water quantities of up to 80 l/h, OmniaLab^DS guarantees international water standards compliance. The combination of regenerative polishing cartridge and an optional emergency supply makes this system extremely reliable for supplying clinical analytical systems, as well as for feeding water to steam sterilizers and washer-disinfectors.

Features

• OptiFill dispenser is standard
• 100 l tank with quality recirculation and pressure outlet
• Tank volume display in percent
• Tank volume can be modularly increased
• Simple, cost-effective filter replacement
• Leakage sensor is standard
• Emergency supply (optional)
• Degassing unit (optional)

• Technical Data
• Flow Chart

Specifications	OmniaLabDS20	OmniaLabDS40	OmniaLabDS60	OmniaLabDS80
Type II + CLRW (CLSI) DIN EN 285 + ISO EN 15883
Pure water performance l/h at 15 °C	20	40	60	80
Conductivity μS/cm	0.1 – 1.0	0.1 – 1.0	0.1 – 1.0	0.1 – 1.0
Resistance M Ω x cm	10 – 1	10 – 1	10 – 1	10 – 1
Dispensing performance dispenser l/min.	up to 2	up to 2	up to 2	up to 2
Pure water tank pressurized outlet	optional	optional	optional	optional
Particles*/ml	< 1	< 1	< 1	< 1
Bacteria* CFU/ml	< 0.1	< 0.1	< 0.1	< 0.1
Feedwater requirements
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Manganese and iron content mg/l	< 0.05	< 0.05	< 0.05	< 0.05
Free chlorine content mg/l	< 0.1	< 0.1	< 0.1	< 0.1
Silt density index (SDI)	max. 3	max. 3	max. 3	max. 3
Technical data
Operating pressure bar	2 – 6	2 – 6	2 – 6	2 – 6
Supply voltage Volt/Hz	90-240/50-60	90-240/50-60	90-240/50-60	90-240/50-60
Connected load kW	0.1	0.1	0.1	0.1
Connector size	R 3/4"	R 3/4"	R 3/4"	R 3/4"
Ambient temperature °C	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35	+ 2 up to 35
Dimensions Tower** W x H x D mm	511 x 1520 x 575	511 x 1520 x 575	511 x 1520 x 575	511 x 1520 x 575
Dimensions Base cabinet tank mm	511 x 800 x 575	511 x 800 x 575	511 x 800 x 575	511 x 800 x 575
Weight kg (without polishing cartridge)	39	39	40	40
* with sterilizing filter 0.2 μm ** with OptiFill Dispenser

Article no.	System type*	Typical applications
18800020	OmniaLabDS20	Feedwater for analyzers, autoclaves and laboratory washers
18800040	OmniaLabDS40	Feedwater for analyzers, autoclaves and laboratory washers
18800060	OmniaLabDS60	Feedwater for analyzers, autoclaves and laboratory washers
18800080	OmniaLabDS80	Feedwater for analyzers, autoclaves and laboratory washers
* RO cartridge, stainless steel polishing cartridge, sterile filter capsule 0.2 μm, sterile overflow and sterile vent filter + CO2 absorber included

Accessories
19200020	Pre-treatment unit OmniaLab – 10“
19200050	UV tank disinfection unit 254 nm
19200051	UV Flow through disinfection 254 nm
12280050	Replacement/second polishing cartridge type DS 2800 RV
19200040	Emergency supply
19200041	Degassing unit
16561201	External pressure booster pump SC 3000